The oil tank level gauge is applied to the tank area measurement

Industrial production, transportation and civil engineering will apply a large amount of liquid fuels or liquid raw materials, and the production process will also produce a large number of liquid finished products or semi-finished products.

In order to store, transport, and manage these precious liquid raw materials and finished products, it is often necessary to build a large number of storage tanks in a certain area, that is, tank farms.

Accurate measurement of the liquid inventory stored in these tanks is very important for the economic operation and effective production of factories or projects.

The measurement of the tank farm is through the measurement of different engineering quantities (such as liquid level, pressure, temperature, density, etc.) of the liquid stored in the tank, and then according to the calibration data of the tank’s geometric dimensions and related measurement standards, the storage tank is obtained after calculation The process of storing data such as the mass and volume of the liquid.

Liquid level measurement and temperature measurement are very important for tank measurement. The oil tank level gauge using magnetostrictive technology can accurately complete the level measurement and temperature measurement in the above process, and has the following technical advantages for tank measurement:

1. Multi-parameter measurement, the same tank level gauge can measure the height of the storage liquid level and the height of the tank bottom water at the same time, as well as up to 5 points of multi-point temperature measurement.

2. The measurement accuracy is high, and the highest accuracy of the oil tank level gauge can reach +/-1 mm.

4. The explosion-proof standard of the oil tank level gauge is compatible with explosion-proof and intrinsic safety.

5. The maximum range of the oil tank level gauge can reach 25 meters, which can meet most of the measurement requirements of a large number of storage tanks.

The parts in contact with the liquid are made of 316L stainless steel, which is not only corrosion resistant, but also meets the FDA’s food contact material requirements.